Timer; Setting The Timer; Activating And Deactivating Timer; Sleep - Philips MCM275/BK User Manual

Timer

Setting the timer

The set can be used as an alarm clock, whereby
the selected source (CD, TUNER or USB) star ts
playback at a preset time. Make sure the
clock is set before using the timer.
1
Press and hold TIMER on the remote control
until SET TIMER appears
➜ flashes. SELECT SOURCE scrolls
➜ Display shows current source CD, TUNER or
USB
2
Press SOURCE on the set repeatedly to select
the source (or press CD, TUNER or USB on
the remote control)
3
Press TIMER to confirm
➜
The hours digits start flashing
4
Hold down or press VOLUME +/- repeatedly
to set the hours (or turn VOLUME on the
set)
5
Press TIMER to confirm
➜
The minutes digits start flashing
6
Hold down or press VOLUME +/- repeatedly
to set the minutes (or turn VOLUME on the
set)
7
Press TIMER to confirm
➜
The timer is now set and activated
➜
At the set alarm time, the CD, TUNER or
USB will switch on (volume level: max. 20)
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
Activating and deactivating
TIMER
●
Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜
If activated, the last set source and start time
are displayed
➜ If deactivated, "TIMER OFF" appears
Helpful hints:
The timer will not work at the set time if
- the set is switched on
- the timer is deactivated
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB

SLEEP

You can set a certain period of time after which
the set will switch to standby.
●
On the remote control, press SLEEP
repeatedly to select the desired time period
options (in minutes):
➜
Display shows in sequence: Sleep 90, 75,
60, 45, 30, 15
➜
Display shows the selected option briefly and
returns to its previous status. The icon
appears
To deactivate the sleep timer, press
SLEEP again
➜
The icon disappears
or
Press STANDBY-ON to switch the set to
standby (or y on the remote control)
Helpful hints:
– The SLEEP function does not affect your alarm
time setting.
SLEEP
25