Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MC108/93 User Manual

POWER SOURCE BAND
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

● Press POWER (y on the remote control).
➜ The system will switch to the last selected
source.
● Press SOURCE (CD, TUNER or AUX on
the remote control).
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press POWER (y on the remote control).
➜ The volume level (up to maximum volume
level of 20), interactive sound settings, last
selected source will be retained in the player's
memory.

Power-saving automatic standby

The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
- +
PROG/CLOCK VOLUME TUNING

Basic Functions

Adjusting volume and sound

1
Press VOLUME – /
volume.
➜ Display shows the volume level
number from 0-32.
2
Press DBB (on the remote
control) to switch bass
enhancement on or off.
➜ Display shows:
DBB
DBB is activated.
3
Press MUTE on the remote control to stop
sound play-back instantly.
➜ Playback will continue without sound and the
display shows MUTE .
● To star t sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
+
to increase or decrease
and a
VOLUME
DBB MUTE
if the
11