This product complies with all relevant European
directives. For details, please see the Declaration of
Incorporation (DOI) at the back of this publication.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
Introduction
This rotary-blade lawn cutting deck is mounted
to a ride-on machine and is intended to be used
by professional, hired operators in commercial
applications. It is primarily designed for cutting grass
on well-maintained lawns in parks, sports fields, and
on commercial grounds. It is not designed for cutting
brush.
Important:
To maximize the safety, performance,
and proper operation of this machine, carefully
read and fully understand the contents of this
Operator's Manual. Failing to follow these
operating instructions or to receive proper
training may result in injury. For more information
on safe operating practices, including safety tips
and training materials, go to www.Toro.com.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. The model
and serial numbers are stamped into a plate that is
mounted on the mower housing. Write the numbers in
the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
1), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2018-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
Setup ........................................................................ 6
Operation .................................................................. 8
Maintenance ........................................................... 13
Lubrication........................................................ 14
Lubricant ....................................................... 16
Arms ............................................................. 17
Bearings........................................................ 17
2
Figure 1
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g000502