1. Pull link
2. Torsion spring
3. U-bolts
Lubrication
Service Interval: Every 50 hours
The machine has grease fittings that must be
lubricated regularly with No. 2 lithium grease. If
the machine is operated under normal conditions,
lubricate all bearings and bushings after every 50
hours of operation or immediately after every washing.
Lubricate the following areas:
•
Caster fork shaft bushings (4)
Figure 15
•
Deck links (5)
(Figure
(Figure
15)
16)
Figure 14
4. Deck-lift chain
5. Retainer pin
6. Shoulder screw
•
Idler arm pivots (4)
g011557
14
Figure 16
(Figure
17)
Figure 17
g025301
g025655
g025838