Hdu-409 Indoor Enclosure Capacities - ADC 2 User Manual

LTPH-UM-1234-01
1 Always leave at least one empty slot between adjacent doublers. The
adjacency rule only applies to the left and right sides of the doubler. The
top of one unit can be adjacent to the bottom of another, but should be
avoided.
Rule 1 does not apply to the HRE-819, the Keptel RF 819, and
all enclosures listed in
Cage enclosures. These products have the required slot
separations built into their design.
2 Allow as much room as possible between doublers on all four sides.
Table 4. HDU-409 Indoor Enclosure Capacities
Vendor Description
CHARLES Indoor wall mount
SPC Indoor rack/wall mount
HDU-409 Lists 1, 2, and 3
Table 5 on page 12
Model No.
CiAC2300
CiAC2002
4400-09
April 30, 2003
Generic Information
with Universal Card
HDU-409 239 T1
Doubler Repeater
Capacity Capacity
7 7
2 2
18 18
11