Recording; Manual Recording & Schedule Record - Jands SNVR-8004ST User Manual

1) Encoding Type:
Main Stream (Normal), Sub Stream, Main Stream (Event) for selection.
Main Stream: double click to show single image or full screens image are main stream, also
recording playback is main stream.
Sub Stream: 9/16/25/36 screens display are using sub stream, IE or mobile viewing are sub
stream also.
Main Stream (Event): motion detection and alarm trigger recording are using this.
2) Stream Type: there are video, video & audio two types for selection.
When connect with audio, please select video & audio mode, or there will be no audio when
playback.
3) Resolution: NVR will get IP camera main stream and sub stream resolution automatically,
when the image is not good, adjust from here according to necessery.
4) Bitrate Type: set variable bit rate(VBR) and constant bit rate(CBR).
5) Bitrate: set the bit rate upper limit for coding.
main stream are 1080P: 6000kbps, 720P: 4000kbps ;
set the bit rate upper limit for coding sub stream is 512-1024kbps.
6) Frame Rate: suggest to set full frame 25/30.
7) Video Quality: suggest to select highest.
When all the IP cameras connected with NVR are the same brand, after finish setting 1
click Copy To to apply the setting to all channels is capable, then click Save.

10. Recording

10.1 Manual Recording & Schedule Record
10.1.1 Manual Recording
Right click to bring main menu, click【Record】to enter record setting.
Manual recording has the highest priority, after performing Manual,
the corresponding channel will begin recording.
- 8 -
st
channel,