Summary of Contents for Jands SNVR-8004ST
- Page 1 Network Video Recorder SNVR-8004ST Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference.
-
Page 2: Safety Precautions
Statement: This manual supports NVR model: 1U 4/8ch and 2U 16/32ch. As product update, the NVR functions might be different from the manual showing, please follow the product that you got. Safety Precautions 1. Do not use wet hands or any damp objects to touch the power switch and network digital video recorder (NVR), in order to avoid electric shock. -
Page 3: Table Of Contents
Table of Contents Hard Disk Installation ........................- 1 - Hard Disk Installation Steps ....................- 1 - Rear Panel Interface .......................... - 1 - Host Side Operation .......................... - 2 - ... -
Page 4: Hard Disk Installation
2. Connect the hard disk data wire and power and open the top cover supply wire 3.Fix the HDD on the bottom plate 4.Put back the cover and fix it by screws 2. Rear Panel Interface (PoL ports only exist in SNVR-8004ST-P) - 1 -... -
Page 5: Host Side Operation
3. Host Side Operation 3.1 Start System Plug power cable, press power switch, the power led will be on and the NVR will start. After booting, the video output default to multi-window output mode. If the booting time is within the record setting time period, the system will auto enable the record function. -
Page 6: Power Off
3.4 Power off 1. Click the power switch at the rear panel can shutdown the device. 2. 【Main Menu】 【Power Off】 ， select 【Yes】 (By this way, user need have shutdown authority) (Suggest to shutdown device in this way, it can avoid damaging the device from v electricity cut-off by accident). -
Page 7: Connect With Ip Camera
Remote port setting: the default is 5050, if there are several NVRs in the LAN, need to change this port is for login NVR by IE, CMS. Login NVR by mobile, the port should be +3 based on the device port. HTTP port: the default port is 80, suggest modifying it. -
Page 8: Automatic Search
C- Area is cameras channel setting area——according to the selection sequence in A zone, to sort the 1-36 channels image order. Select All to add IP cameras to the all channel by one click. D-Area is camera user name and password filling area——this area is camera network parameter 6.2 Automatic Search Right click to select 【IP channel Setting】Auto If the IP camera has private protocol with AEVISION NVR, NVR will assign IP address to the... -
Page 9: Digital Zooming
7.3 Digital Zooming During image preview and playback, roll mouse roller to do digital zooming, it zoom the image as mouse pointer as the center. The max can do 15X Zoom Out Zoom In zooming. Drag the zoomed image by mouse to see image detail. -
Page 10: System Setting
9. System Setting 9.1 Device Parameter Click【Setting】DeviceDevice info to check device spec, information and time setting Attention: select mode according the connected IP camera channels and resolution, after change the model, click save and reboot the device. When the image is good in 9/16/25/26 screen modes, after double click the image to zoom, the image is stuck or become black screen change to 1080 mode can solve it. -
Page 11: Recording
1) Encoding Type: Main Stream (Normal), Sub Stream, Main Stream (Event) for selection. Main Stream: double click to show single image or full screens image are main stream, also recording playback is main stream. Sub Stream: 9/16/25/36 screens display are using sub stream, IE or mobile viewing are sub stream also. - Page 12 10.1.2 Schedule Record Right click to bring main menu, click 【Setting】 ChannelSchedule Record, the default setting is 24 hours recording, users can set the recording plan according to the necessary and copy it to other channel Note: If NVR stop recording in a regular time, please check schedule record status, the schedule might be get wrong, please adjust them to manual record.
-
Page 13: Playback
Playback 10.2 Right click to bring main menu, click【playback】to open the window： Channel Select: Select the channels that need do playback, system will find the required recording file. The date that has recording is highlighted by red color in calendar. Date Select: Select the playback date. -
Page 14: File Manager
File Manager 10.4 Right click to bring main menu, click【File Manager】icon, the back up file of external storage device and local captured picture will list in the folder. 1) Check photo in the hard disk: Select date on calendar, if there was any capture in that day , it would be displayed in the list form. -
Page 15: System Upgrade
11.2 System Upgrade Right click mouse, click 【Setting】 SystemUpdate, insert the USB storage device into the NVR, click Browse to find the upgrade file, and click Upgrade. Upgrade include firmware upgrade, boot screen image upgrade, and patch upgrade. Except USB memory upgrade, it also support to be upgraded by network. Note: When the NVR is upgrading, DO NOT perform any other operations or power off it, otherwise the NVR will fail to enter the system , and have to be send back to factory for repairing. -
Page 16: Ie Viewing
12. IE Viewing 12.1 User Log In 1) Enter the domain+colon+Http port . or enter the static IP +colon +http port . You can download and install IE ActiveX from NVR through the Internet. Input the IP address of the NVR in the IE browser, port number 5050, user name and password, then the below interface will pop-up: 13. -
Page 17: Windows Mobile System
Remark: You can adjust the settings according to the performance and network condition. Mobile phone with higher performance and better network condition will display better effect. If the network condition is no good, you can reduce the frame rate to ensure the fluency. 13.3 Android Mobile phone app supports Android system version above V1.5,... - Page 18 Mobile client software supports 2003 windows mobile system and above vesion. Currently it only supports touch screen version. ☆ Installation and Operation Instruction 1) The Installation is carried out by copying to the phone with data cable via MEYE_WM.cab. 2) Click the corresponding icon appeared as right: 13.6 APPLE iOS Apple phone needs to support iOS 3.0 or above,...
-
Page 19: Troubleshooting
Troubleshooting 1. Device Fails to Start or Restart Continuously 2. Failure to Use Remote Controller Possible Reasons: Possible Reasons: 1) NVR’s upgrading wrong program leads to 1) Please check whether the batteries in the damage of system software. Remote Controller are installed correctly, 2) NVR encounters power or board faults, especially the postive and negative. - Page 20 9. No sound when preview or playback 1) Check if there is an audio in your IPC: you can test it through IE or the built-in client or through computer. 2) Wrong audio format: NVR only supports G711 audio compressed format. Please adjust your format through IE of the built-in client.