Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MC147/98 User Manual

Basic Functions

STANDBY-ON
M I C RO S Y S T E M M C 1 4 7
iR
CD/CD - R/CD - RW COMPATIBLE
SOURCE
PRESET
DBB
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY -ON 2 or SOURCE
(POWER on the remote control).
➜
The system will switch to the last selected
source.
●
Press DISC, TUN, TAPE or AUX on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON 2 on the system (or
POWER on the remote control).

Power-saving automatic standby

The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
10
VOL
TUNING REPEAT PROG
VOL

Adjusting volume and sound

1
Press VOL +/- to adjust volume.
➜ Display shows the volume level VOL and a
number from 0-32.
2
Press DBB to switch bass enhancement on or
off.
➜
Display shows:
3
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
if the DBB is activated.