Chapter 4 Setting Backup Software
4.5 NetVault
4.5
NetVault
This section provides notes about the settings that are performed for NetVault.
4.5.1
Notes on Operation
■
Cleaning tape drives
•
NetVault has a function to automatically clean tape drives. When automatically cleaning tape drives, use
the NetVault's automatic cleaning function.
•
To use the NetVault cleaning function, make settings as follows.
-
For NetVault Backup 9 and earlier
To use the cleaning function for NetVault Backup 9 or earlier, perform the following settings.
Procedure
1
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Specify the Generic Cleaning items of the drive as follows:
•
Issue a load command to start cleaning cycle: off (the default setting is "on")
•
Use Generic Cleaning: on (the default setting is "off")
The following shows an example configuration in which "Issue a load command to start cleaning
cycle" is set to "off" and "Use Generic Cleaning" is set to "on".
Copyright 2019 FUJITSU LIMITED
40
P3AG-3752-03ENZ0