Fujitsu ETERNUS LT140 User Manual page 21

Chapter 1 Overview
1.2 References for Setup
IMPORTANT
Refer
Refer
Refer
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Setting the LT140
Perform the settings for the LT140.
Change the topology setting to "Fabric". Set a fixed value for the link speed.
-
"Chapter 2 Setting the LT140" (page 22)
-
"2.2 Settings for Fibre Channel Connections" (page 22)
-
"2.2.1 Setting the Link Speed" (page 22)
-
"2.2.3 Setting the Topology (for Connections via FC Switches)" (page 23)
Setting the Operating System
Make settings for the HBA driver and the device driver.
-
"3.3 Windows" (page 29)
-
"3.3.2 Fibre Channel Connections" (page 30)
Setting Backup Software
Apply patches, make settings for the robot driver, and set up the backup software.
•
Backup software used
-
NetBackup
•
"4.1 NetBackup" (page 34)
-
NetWorker
•
"4.2 NetWorker" (page 37)
-
IBM Spectrum Protect (IBM Tivoli Storage Manager)
•
"4.3 IBM Spectrum Protect" (page 38)
-
Backup Exec
•
"4.4 Backup Exec" (page 39)
-
NetVault
•
"4.5 NetVault" (page 40)
-
Arcserve Backup
•
"4.6 Arcserve Backup" (page 50)
-
Veeam Backup & Replication
•
"4.7 Veeam Backup & Replication" (page 50)
Copyright 2019 FUJITSU LIMITED
21
P3AG-3752-03ENZ0