Ec.declaration.of.conformity - PR PRetrans 5104 Manual

MOUNTING:
Only.technicians.who.are.familiar.with.the.technical.terms,.warnings,.and.
in. s truc. t ions.in.the.manual.and.who.are.able.to.follow.these.should.connect.the.
device...
Should.there.be.any.doubt.as.to.the.correct.handling.of.the.device,.please.
contact.your.local.distributor.or,.alternatively,..
PR electronics A/S, Lerbakken 10, DK-8410 Rønde, Denmark,
tel: +45 86 37 26 77.
.
Mounting.and.connection.of.the.device.should.comply.with.national.legislation.
for.mounting.of.electric.materials,.i.e..wire.cross.section,.protective.fuse,.and.
location..Descriptions.of.input./.output.and.supply.connections.are.shown.in.
the.block.diagram.and.side.label..
The.following.apply.to.fixed.hazardous.voltages-connected.devices:
The.max..size.of.the.protective.fuse.is.10.A.and,.together.with.a.power.
switch,.it.should.be.easily.accessible.and.close.to.the.device..The.
power.switch.should.be.marked.with.a.label.telling.it.will.switch.off.the.
voltage.to.the.device.
Year.of.manufacture.can.be.taken.from.the.first.two.digits.in.the.serial.number.
CALIBRATION AND ADjUSTMENT:
During.calibration.and.adjustment,.the.measuring.and.connection.of.external.
voltages.must.be.carried.out.according.to.the.specifications.of.this.manual..The.
technician.must.use.tools.and.instruments.that.are.safe.to.use..
NORMAL OPERATION:
Operators.are.only.allowed.to.adjust.and.operate.devices.that.are.safely.fixed.
in.panels,.etc.,.thus.avoiding.the.danger.of.personal.injury.and.damage..This.
means.there.is.no.electrical.shock.hazard,.and.the.device.is.easily.accessible..
CLEANING:
When.disconnected,.the.device.may.be.cleaned.with.a.cloth.moistened.with.
distilled.water..
LIABILITY:
To.the.extent.the.instructions.in.this.manual.are.not.strictly.observed,.the.
custom. e r.cannot.advance.a.demand.against.PR.electronics.A/S.that.would.
otherwise.exist.according.to.the.concluded.sales.agreement.
18
EC DECLARATION OF CONFORMITY
As.manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby.declares.that.the.following.product:
Type: 5104
Name: Repeater / Power Supply
is.in.conformity.with.the.following.directives.and.standards:
The.EMC.Directive.2004/108/EC.and.later.amendments
EN 61326-1 : 2006
. For.specification.of.the.acceptable.EMC.performance.level,.refer.to.the.
electrical.specifications.for.the.device.
The.Low.Voltage.Directive.2006/95/EC.and.later.amendments
EN 61010-1 : 2001
The.ATEX.Directive.94/9/EC.and.later.amendments
EN 50014 : 1997 E incl. A1+A2, EN 50020 : 2002 E
and EN 50281-1-1 : 1998 incl. A1
ATEX certificate: DEMKO 99ATEX126013
No.changes.are.required.to.enable.compliance.with.the.replacement.standards:.
EN 60079-0 : 2006 and EN 60079-11 : 2007
EN 61241-0 : 2006 and EN 61241-11 : 2006
Notified.body:
UL International Demko A/S
Lyskaer 8
P.O. Box 514
2730 Herlev
Denmark
Rønde,.6.September.2010.
.
Kim.Rasmussen.
Manufacturer's.signature
19