Advertisement
H I
Assembly Instruction Step 10
O
Hodedah
www.hodedah.com
support@hodedah.com
10
O
P
* Place the 2 back panel
O onto the back of the
upper main unit. Then
align them properly for
nailing.
* Then use hammer to
nail the nails one by one
and at center of 4 side
edges. Gap between 2
nails should be about
100mm for all.
* Place the back panel P
onto the lower back unit,
align it properly for
nailing.
* Then use hammer to
nail the nails one by one
and at center of 4 side
edges. Gap between 2
nails should be about
100mm for all.
10
Nail
52 Pcs.
19
Advertisement
