Advertisement
H I
* Place and fix panel M onto panel G,K and L, and align properly by inserting the 2
(down) mini fix screws ⑥ onto the L-thru holes at the front edge of panel G and L.
At the same time, inserting panel K front side dowel going onto Panel M 's non-thru
holes.
* Then, tighten mini fix ⑥ clockwise to lock the mini fix up for tightening panel M.
Cover 2 mini fix caps provided by pushing the cover 's stem onto the hole of mini fix
nut on front side of panel G and L.
M
G
2
6
Screw
M6 x 50mm
4 Pcs.
CAUTIONS
: When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( F & M ) may be damaged.
Assembly Instruction Step 7
M
K
G
11
Mini Fix Cap
Allen Key
2 Pcs.
1 Pc.
Hodedah
www.hodedah.com
support@hodedah.com
L
* Place and fix panel F onto panel G and
panel L by pushing and slotting the
dowels onto the non-thru holes at Panel F.
* Using allen key ⑪ to tighten screws ②
from the 4 thru holes of panel F, one by
one.
Dowel / Mini Fix Installation
2
F
2
2
11
2
11
11
11
16
Advertisement
