Advertisement
H I
Place and fix panel F onto panel A and panel E, and align properly by inserting the 4
(down) mini fix screws ⑥ onto the L-thru holes at top edge of panel A
and E. At the same time, inserting panel A,C and panel E 's upside dowels going
onto panel F 's non-thru holes.
F
5
6
Mini Fix Cap
4 Pcs.
CAUTIONS
: When insert the PVC Dowels to non-thru holes, don't push to hard. Otherwise, the side
panels ( F ) may be damaged.
Assembly Instruction Step 8
E
Hodedah
www.hodedah.com
support@hodedah.com
F
C C
A
*Then, tighten mini fix ⑥ clockwise to lock
the mini fix up for tightening panel F up.
Cover 4 mini fix caps provided by pushing
the cover 's stem onto the hole of mini fix
nut on upper side of panel A and E.
Dowel / Mini Fix Installation
E
C
17
Advertisement
