Table of Contents
Advertisement
Radio Reception
Tuning to radio stations
1
Press SOURCE or TUNER once or more to
select the desired waveband : FM or MW (AM).
2
Press and hold ALBUM/TUNING
until the frequency indication starts to change,
then release.
➜
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
➜
If the FM station is received in stereo,
shown..
3
Repeat step 2 if necessary until you find the
desired radio station.
●
To tune to a weak station, press ALBUM/
5 6
briefly and repeatedly until
TUNING
optimal reception found.
Note:
– The system is equipped with a fixed FM antenna
and a built-in MW (AM) antenna. For optimal FM
reception, fully extend and adjust the position of
the FM antenna until the strongest signal is found.
14
pg 001-018_MCM285-77_Eng
Programming radio stations
You can store up to 40 radio stations (FM:20,
MW (AM): 20) in the memory.
Automatic programming
1
Press PRESET +/- í/ë to select the desired
preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
➜
All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by MW (AM) band.
To stop automatic programming
●
Press STOP9 .
Note:
5 6
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Manual programming
is
=
1
Tune to your desired radio station (refer to
"Tuning to radio stations").
2
Press PROGRAM.
➜
PROG
To store the radio station to another
preset number
●
Press PRESET +/- í/ë to to select the
desired preset number.
3
Press PROGRAM again to store the radio
station.
➜
PROG
4
Repeat steps 1–3 to store other radio stations.
To exit manual programming
●
Press STOP 9.
Tuning to preset radio stations
●
Press PRESET +/- í/ë until the desired
preset station is displayed.
14
starts flashing.
disappears
2008.5.7, 16:55
Advertisement
Table of Contents
