External Sources; Connecting External Equipment; Clock/Timer; Setting The Clock - Philips MCM285/77 User Manual

Connecting external equipment

1
Connect the audio out terminal of the portable
device (i.e. iPod or MP3 player) to the MP3
LINK terminal of your system.
2
Press SOURCE once or more to select MP3
LINK.
➜ "MP3
in
" is displayed.

Setting the clock

1
In standby mode, press and hold DISPLAY/
CLOCK.
➜ The clock digits for the hours flash.
2
Press PRESET +/- í /ë (í/ë on the
remote) to set the hours.
3
Press DISPLAY/CLOCK.
➜ The clock digits for the minutes flash.
4
Press PRESET +/- í/ë (í/ë on the
remote) to set the minutes.
5
Press DISPLAY/CLOCK to confirm the time.
Note:
– If the clock has not been set, - - : - - will be
displayed.
pg 001-018_MCM285-77_Eng
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.

Setting the sleep timer

The sleep timer enables the system to switch off
by itself after a set period of time.
1
In active mode, press SLEEP on the remote
control repeatedly until the desired timer option
appears.
➜ Selections are as follows (time in minutes):
SLPOFF=SLP120=SLP90=SLP60
=SLP45=SLP30=SLP15=SLPOFF
➜ Display shows
deactivated.
2
To cancel the sleep function, either press
SLEEP on the remote control once or more
until "SLPOFF" appears, or press STANDBY-
ON (y on the remote) to switch to standby
mode.
15

External Sources

Clock/Timer

if activated, and disappears if
2008.5.7, 16:55
15