Introduction; Product Description - Beha-Amprobe GT-800 User Manual

GT-600/GT-800 Instruction Manual

Introduction

You have acquired a high-quality measurement instrument manufactured by
BEHA-AMPROBE, which will enable you to perform repeatable measurements
for a very long period of time.
The portable appliance tester GT-600/GT-800 is a measurement instrument used
for safety inspection on electrical appliances complying with VDE 0701-0702 and
documentation of test results.

Product description:


Protective bonding resistance measurement (R
A AC. The test is carried out on plugged and also on permanently connected
appliances.

Insulation resistance measurement (R
GT-800 only). Appliances class I with heater, class I, class II and class III can be
tested.

Substitute leakage current measurement (I
Appliances class I and class II can be tested.

Protective conductor current measurement (I

Touch current measurement (I

Apparent power, active power, mains voltage, load current and power factor
PF measurement (P/I

Protective conductor current I
clamp method (GT-800 only).

IEC CORD test (PE continuity, insulation resistance, L continuity, N continuity,
L/N shorted).

Test of portable RCD (PRCD), PE continuity, TEST button, output insulation
resistance, PE current, functional test at L disconnection, functional test at N
disconnection, trip out time at I
N
I , tripping current (GT-800 only).

Protective extra low voltage (PELV) measurement.

Safety extra low voltage (SELV) measurement.

AUTO Test (13 factory-programmed AUTO-Tests, 17 customer-created AUTO-
Tests) (GT-800 only).

Extremely easy operation using the rotary switch and the START/STOP
button.

Automatic start function for protective bonding resistance measurement
allows both-hands measurements on measured objects that are difficult to
access.

Compensation of test lead resistance for protective bonding resistance
measurement.

Calculation of limits for protective bonding resistance.

Automatic mains voltage polarity exchange at protective conductor current
and touch current measurements (GT-800 only).

Data memory for over 1000 measurement results.

Integrated interface (USB 2.0) for transfer of measurement results to PC.

Separate interface (USB 2.0) for connection of optional USB barcode reader,
USB keyboard, USB memory stick or USB printer.
ISO
) direct method
T
).
L
and load current I
PE
N/2
, trip out time at I
7
), test current 0.2 A AC and 5
PE
), test voltage 500 VDC (and 250 VDC
), test voltage 45 V AC.
SUB
), differential method
PE()
.
measurement (
L
N
, trip out time at 5
.
),