Table of Contents
Advertisement
9 Other features
Activate demonstration mode
You can see an overview of all features.
1
In standby mode, press
unit to activate the demonstration mode.
»
A demonstration of major available
features starts.
To deactivate the demonstration mode:
1
Press
on the main unit again.
Adjust brightness of display
panel
1
In standby mode, press MODE/DIM
repeatedly to select different levels of
brightness for the display panel.
Set the alarm timer
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold SLEEP/
TIMER.
»
The hour digits are displayed and begin
to blink.
3
Press + VOL - to set the hour, then press
SLEEP/TIMER again.
»
The minute digits are displayed and
begin to blink.
4
Press + VOL - to set the minute.
5
Press SLEEP/TIMER
» [OFF] (off) begins to blink.
6
To activate the wake-up timer, press +
VOL - to select [ON] (on) while [OFF]
(off) is blinking.
»
A clock icon appears on the display.
on the main
»
The unit turns on automatically at
the set time and switches to the last
selected source.
»
To deactivate the alarm timer, select
[OFF] (off) at step 6.
Set the sleep timer
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
»
The unit turns off automatically after
the set period of time.
Connect other devices
Listen to an audio player
You can listen to audio player through this unit.
1
Connect the audio player.
For audio players with red/white
audio output sockets:
Connect a red/white audio cable
(not supplied) to the AUX IN L/R
sockets and to the audio output
sockets on the audio player.
EN
25
Advertisement
Table of Contents
