Table of Contents
Advertisement
Connect FM antenna
Tip
For optimal reception, fully extend and adjust
the position of the antenna.
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL jack.
The unit does not support MW radio
reception.
1
Connect the supplied FM wire antenna to
the FM AERIAL socket on the unit.
Connect TV
Connect video cables
With this connection, you can watch video
from the unit on the TV screen.
You can select the best video connection that
your TV supports.
Option 1: connect through
component video (for a standard TV
or Progressive Scan TV).
Option 2: connect through S-Video
(for a standard TV).
Option 3: connect through
composite video (CVBS) (for a
standard TV).
Option 1: Connect through
component video
Connect a progressive scan TV through
component video for higher quality video.
Note
The progressive scan video quality is only
available when a progressive scan TV is
connected.
If your TV does not support progressive scan,
you cannot view the picture.
For how to activate progressive scan on your
TV, refer to the TV user manual.
Connect a progressive scan TV through
component video for higher quality video.
1
Connect component video cables (red/
blue/green - not supplied) to:
the VIDEO OUT (Pr/Cr Pb/Cb Y)
sockets on this unit.
the component input sockets on the
TV.
TV
Pr/Cr
Pb/Cb
Y
COMPONENT VIDEO IN PUT
EN
13
Advertisement
Table of Contents
