Find The Correct Viewing Channel; Select The Correct Tv System; Change System Menu Language - Philips MCD388/12 User Manual

»
The blue and green indicators on the
subwoofer flash alternately.
»
If wireless connection succeeds,
OK] (pair OK) is displayed and the
blue indicators on the subwoofer lights
up.
3
Turn on the main unit again.
Note
•
If the wireless connection fails again, check
whether there is any conflict or strong
interference (for example, interference from
other electronic devices) around your location.
After removal of the conflict or strong
interference, repeat the above procedures.
Switch to standby mode
1
Press to switch the unit to Eco Power
Standby mode.
»
The backlight on the display panel
turns off.
»
The blue Eco Power indicator turns on.
Tip
•
In the Eco Power mode, you can press
CLOCK to switch to the standby mode and
view the clock (if set).
•
If the system remains in the standby mode for
more than 90 seconds, it switches to the Eco
Power mode automatically.
Find the correct viewing
channel
1
Press to turn on the unit.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
•
[PAIR
Tip
• The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.

Select the correct TV system

Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
Press SYSTEM MENU.
2
Select [Preference Page].
3
Select [TV Type] and then press
4
Select a setting and then press OK.
•
•
•
5
To exit the menu, press SYSTEM MENU.
Change system menu
language
1
Press SYSTEM MENU.
2
Select [General Setup Page].
3
Select [OSD Lang] and then press
4
Select a setting and then press OK /
5
To exit the menu, press SYSTEM MENU.
Press the source button repeatedly
on the remote control of your TV.
[PAL] - For TV with PAL color
system.
[Auto] - For TV that is compatible
with both PAL and NTSC.
[NTSC] - For TV with NTSC color
system.
.
.
.
EN 19