IBM EMX0 PCIe3 Installing page 32

Figure 13. Placing the cable management bracket in the operating position
12. If you are using a ruggedized rack or relocating a rack with the EMX0 PCIe3 expansion drawer in it,
secure the drawer to the rear of the rack by using the two securing screws (B) as shown in Figure 14.
Note: If you have a different scenario, the securing screws are optional.
B
Figure 14. Inserting the securing screws at the rear of the system
13. Continue with "Connecting an EMX0 PCIe3 expansion drawer to your system" on page 17.
16
Power Systems: Installing the EMX0 PCIe Gen3 I/O expansion drawer