Basic Functions; Switching The System On; Power Saving Automatic Standby; Adjusting Volume And Sound - Philips MCM710/61 User Manual

Basic Functions

Important!
Before you operate the system, complete
the preparation procedures.

Switching the system on

●
Press STANDBY-ON B (or B on the
remote).
➜
The system will switch to the last selected
source.
●
Press SOURCE on the system or CD, USB,
FM or AUX on the remote control.
➜
The system will switch to the selected source.
12

Power Saving Automatic Standby

As a power-saving feature, the system
automatically switches to Standby 15 minutes
after a CD has reached the end and no control
is operated.

Adjusting volume and sound

1
Turn the VOLUME -/+ knob or press VOL +/-
on the remote to decrease or increase the
volume.
➜
Display shows the volume level VOL and a
number from MIN 01, 02, ...30 MAX.
2
Press DSC repeatedly to select the desired
sound effect: POP/JAZZ/CLASSIC/ROCK/FLAT.
3
Press DBB to switch bass enhancement on or
off.
➜ DBB appears when enabled and disappears
when disabled.
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound and
MUTE will flash on the display.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.