Continued On The Next Page - Memorex EMI47103PWHT Manual

TO SYNC THE TIME
1
With the power on, connect an iPod as shown on page 8. Press and
hold the Set Time (Sync) button until the current time appears and the
display blinks twice. The time will then be synced.
NOTES:
• The Time (Sync) button will not set the alarm.
• The iPod mini, iPod photo and iPod 4th generation do not support the
SyNC function.
• If you have been traveling, please make sure to reset your iPhone or
iPod device so that the system clock on your device is updated to
your current time zone. We recommend that you turn your iPhone or
iPod device "OFF" and "ON". Also make sure to turn the unit "OFF"
and "ON", and then dock your iPhone or iPod device to SyNC.
TO SET OR RESET THE ALARM TIME
1
1
Press the Set Alarm A 1 or Set
Alarm B 2 button and the
respective alarm will blink in the
display. The Source button and
Volume/Time control will light
when setting the alarm.
OPERATION (CONTINUED)
2

CONTINUED ON THE NEXT PAGE

2
Within five seconds, rotate the
Volume/Time control clockwise to
increase or counter-clockwise to
decrease the alarm time.
NOTE: If the 24/12 hour button is
set to 12, be sure to observe the
AM or PM indicators to make sure
you have set the hour correctly.
14