Continued On The Next Page - Memorex iWake Mi4004 User Manual

TO SET OR RESET THE ALARM TIME
1
With the power off, press either the
AL1 SET button 1 (to set Alarm 1)
or AL2 SET button 2 (to set Alarm
2) ; the Alarm time will blink in the
display.
3
Repeatedly press the ALARM 1 1
or ALARM 2 2 button to select
alarm off, alarm on for buzzer, radio
or iPod .
®
NOTE:
Make
corresponding indicator (BUZZ/
RADIO/iPod)
display.
OPERATION (CONTINUED)
1
1
sure
appears in

CONTINUED ON THE NEXT PAGE

2
2
Within 5 seconds, press the MN
(Minute) button 1 to set the alarm
minute and the HR (Hour) button 2
to set the alarm hour. Make sure to
set the correct AM/PM setting.
Press the AL1 SET button 3 or AL2
SET button 4 again (or wait
approx. 5 seconds); the alarm time
will stop blinking.
4
2
If set to Radio, within 5 seconds, set
the band (AM or FM) using the
AM/FM button 1 and the frequency
using the Tune/Skip/Search l or m
button 2. When the alarm time is
the
reached, the unit will turn on the band
(AM or FM) and the frequency that
the
you selected.
NOTE: When you have selected the
radio band and frequency, after 5
seconds, the radio frequency will be
set and the actual time will appear in
the display again.
12
1
2
1
3