Switching the system on/off
●
Press STANDBY-ON B.
➜
"HELLO" is displayed briefly. The system will
switch to the last selected source.
●
Press DISC, TUNER, USB or AUX on the
remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY-ON B.
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Volume control
Turn VOLUME clockwise or anticlockwise (or
press VOL +/- on the remote control) to
increase or decrease the volume level.
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTING" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Sound control
DBB, DSC and LOUDNESS sound features
cannot be activated at the same time.
Bass enhancement (user-defined)
●
Turn the BASS -/+ knob on the system to
adjust the bass level between -14 and +14.
Treble adjustment (user-defined)
●
Turn the TREBLE -/+ knob on the system to
adjust the treble (high tone) level between -14
and +14.
Basic Functions
DBB (Dynamic Bass Boost)
●
Press DBB on the remote control to enable/
disable DBB feature.
DSC (Digital Sound Control)
●
Press DSC on the remote control repeatedly to
select: CUSTOMER, POPS, JAZZ, CLASSIC or
ROCK.
When "CUSTOMER" is selected, the user-
defined bass and treble settings will be applied.
LOUDNESS
●
Press LOUDNESS on the remote control to
enable or disable LOUDNESS feature.
Dimming the display screen
●
Press DIM on the remote control repeatedly to
select different levels of brightness for the display
screen.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
To activate the demonstration
●
In standby mode, press 9 on the system to
activate the demo mode.
➜
Demonstration will begin.
To deactivate the demonstration
●
Press 9 on the system again.
➜
"DEMO OFF" is displayed.
Note:
– Even if you remove the AC power cord and
reconnect it to the wall socket, the demonstration
will remain off until you activate it again.
17