Asus H310T-A R2.0 Manual page 11

LCD panel monitor switch header (2-pin PANEL_SW)
This 2-pin header is for connecting a monitor switch that can turn off the LCD panel
display backlight.
Display panel VCC power selector (VCC_PWR_SEL)
Pins
1 (Default)
2
3
LVDS connector (40-pin LVDS)
This connector is for an LCD monitor that supports Low-
voltage Differential Signaling (LVDS) interface.
Enable LVDS in the BIOS setup if the LVDS output is disabled
by default.
Flat panel display brightness connector (8-pin LCD_BLKT_PANEL)
This connector is for the LCD panel backlight and brightness controls. It enables
the LCD panel backlight, provides backlight control signals, and provides
brightness control signals for the brightness button on the front panel.
Display panel backlight power selector
(3-pin BLKT_PWR_SEL)
Pins
1-2 (Default)
2-3
USB 2.0 connectors (USB78; USB910)
Connect any USB 2.0 module cable to any of these connectors, then install the
module to a slot opening at the back of the system chassis. These USB 2.0
connectors comply with USB 2.0 specifications and support a connection speed of
up to 480Mbps.
Intel LGA1151 CPU socket
®
Install Intel LGA1151 CPU into this surface mount LGA1151 socket, which is
®
designed for 9th / 8th Generation Intel
processors.
For more details, refer to Central Processing Unit (CPU).
ASUS H310T-A R2.0
Setting
3V
5V
12V
Setting
12V
19V
Core™, Pentium
®
VCC_PWR_SEL
2
1
3V 5V
(Default)
LVDS
PIN 1
PIN 21
BLKT_PWR_SEL
12V 19V
(Default)
Gold, and Celeron
® ®
3
12V
PIN 20
PIN 40
1-3