Audio Setup; Video Setup; Preference Setup - Philips DCD2030 User Manual

• [Sleep Timer]:Sets a sleep timer to
switch the home theater to standby
after a specific time.
[DivX(R) VOD Code]: Get
•
registration code of DivX Video On
Demand Registration.
Note
•
If you select a language which is not available on a disc,
this unit uses the default language of the disc.

Audio Setup

1
Press button.
2
Select to access the setup menu.
3
to access the [Audio Setup]
Select
options.
[Analogue Output]:Selects the analog
•
audio setting based on the audio
device that is connected through the
analog audio jacks.
• [Digital Audio]:Select audio formats
supported by the connected device.
[Sound Mode]: Selects a preset sound
•
effect to enhance the audio output.
[Night Mode]: Select quiet or full
•
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).

Video Setup

1
Press button.
2
Select to access the setup menu.
3
to access the [Video Setup] options.
Select
[TV System]:Selects a TV system that
•
is compatible with the TV.
[Aspect Ratio]: Set screen display
•
format(Pan Scan, Letter Box or Wide
Screen).
• [Progressive]:Enables or disables
progressive scan mode.
• [Picture Settings]: Select a predefined
color setting or set the color manually.

Preference setup

1
Press button.
2
Select to access the setup menu.
3
to access the [Preference Setup]
Select
options.
• [Audio]: Select an audio language for
video.
• [Subtitle]: Select a subtitle language
for video.
[Disc Menu]: Select a menu language
•
for a video disc.
[Parental Control]: Set the rating level
•
to a disc. Restrict access to discs that
are encoded with ratings These discs
must be recorded with rating levels.
• [PBC]:Display or skip the content
menu for VCD and SVCD.
• [Password]: Set or change a password
to play a restricted disc.
[DivX Subtitle]:Select the language of
•
the DivX.
[Version Info.]:Display the software
•
version for the .
[Default]:Reset the home theater to
•
the default settings programmed at
the factory.
Note
•
Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name of
the movie is 'Movie.avi', then you need to name the text
file 'Movie.sub' or 'Movie.srt'.
EN
23