Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
This unit is designed for negative ground (earth) 12 V DC
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
To avoid short-circuit: before you connect, ensure that
the ignition is off.
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
Ensure that all loose leads are insulated with electrical
Ensure that the leads do not get caught under screws or
in moving parts (e.g. seat rail).
Ensure that all ground (earth) leads are connected to a
common ground (earth) point.
Use only the supplied mounting hardware for a safe and
,PSURSHU IXVHV FDQ FDXVH GDPDJH RU ÀUH :KHQ \RX
need to change the fuse, consult a professional.
Pair the Bluetooth-enabled devices
Turn on the Bluetooth function on the device.
Search for Bluetooth device with the device.
Select "CID3750" in the pairing list.
Enter default password "0000".
» iI the pairing succeeds. the phone call
record is displayed.
Make a call
Pair the phone with the unit.
to display the home menu.
» List of available Bluetooth devices is
Tap on the name of your mobile phone.
» The Bluetooth menu is displayed.
to select a phone number.
Tap on a phone number from the list.
» Phone calling starts.
When conversation ends, tap
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.