4.5.4
Fitting the mounting plate to a DIN rail
Procedure
Figure 4-10
Follow the steps below to fit the mounting plate to a DIN rail:
1. Place the mounting plate with the two catches (position A in the figure above) on the
upper edge of the DIN rail.
2. Pull down the DIN rail sliding catch (position B in the figure above) and press the
mounting plate against the DIN rail until the sliding catch engages.
SCALANCE W786C
Operating Instructions, 07/2019, A5E03692138-12
Mounting plate with fittings for DIN rail mounting
4.5 Installation with mounting plate
Mounting
35