Table of Contents
Advertisement
[WARNING!] DO NOT operate any machine or tool if under the influence of
drugs, alcohol, or medication.
Prior to operation EACH AND EVERY time, check for damaged parts prior to
using any machine. Carefully check all guards to see that they operate properly,
are not damaged, and perform their intended functions.
Check for alignment, binding or breakage of all moving parts. Any guard or other
part that is damaged should be immediately repaired or replaced.
[WARNING!] Only connect a machine to a receptacle appropriate for the
standard fitted plug and lead. Do NOT modify or replace a machine electrical
component, with a lesser-rated or sub-standard component.
[CAUTION!] Keep visitors and children away from any machine. DO NOT permit
people to be in the immediate work area, especially when the machine is
operating.
KEEP protective guards in place and in working order.
[CAUTION!] MAINTAIN your balance. DO NOT extend yourself over the tool.
Wear oil resistant rubber soled shoes. Keep floor clear of debris, grease, and
wax.
MAINTAIN all machines with care. ALWAYS KEEP machine clean and in good
working order. KEEP all blades and tool bits sharp.
NEVER leave a machine running, unattended. Turn the power switch to the OFF
position. DO NOT leave the machine until it has come to a complete stop.
REMOVE ALL MAINTENANCE TOOLS from the immediate area prior to turning
the machine ON.
[WARNING!] STAY ALERT, watch what you are doing, and use common sense
when operating any machine. DO NOT operate any machine tool while tired or
under the influence of drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious personal injury.
[WARNING!] USE ONLY recommended accessories. Use of incorrect or
improper accessories could cause serious injury to the operator and cause
damage to the machine. If in doubt DO NOT operate it.
Advertisement
Table of Contents
