Table of Contents
Advertisement
GENERAL SAFETY
NOTE: The [WARNING!] and [CAUTION!] symbols indicate
hazardous situation which, if not avoided, COULD result in death or serious
injury. READ THIS MANUAL completely before assembling and operating this
machine.
[WARNING!] TO AVOID serious injury, death, or damage to the machine, please
read, understand, and follow, all Safety and Operating Instructions before
assembling and operating this machine. This manual is not totally
comprehensive. It does not and cannot convey every possible safety and
operational problem that may arise while using this machine. The manual will
cover many of the basic and specific safety procedures needed in an workshop
and industrial environment.
All federal and state laws, and any regulations having jurisdiction covering the
safety requirements for use of this machine, take precedence over the
statements in this manual. Users of this machine must adhere to all such
regulations.
[WARNING!] Exposure to the dust created by power sanding, sawing, grinding,
drilling and other construction activities may cause serious and permanent
respiratory or other injury, including silicosis (a serious lung disease), cancer,
and death. Avoid breathing the dust, and avoid prolonged contact with dust.
Some examples chemicals and toxins you could be exposed to (but not limited
to) are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically treated timber and
• Asbestos reside from reclaimed timbers
Always operate tool in well-ventilated area and provide for proper dust removal.
Use a dust collection system along with an air filtration system whenever
possible. Always use properly fitting AS/NZS approved respiratory protection
a potentially
Advertisement
Table of Contents
