Table of Contents
Advertisement
appropriate for the dust exposure, and wash exposed areas with soap and water.
[WARNING!] ALWAYS wear eye protection. Any machine can throw debris into
the eyes during operations, which could cause severe and permanent eye
damage. Everyday eyeglasses are NOT safety glasses. ALWAYS wear Safety
Goggles (that comply with applicable Australian Standards/New Zealand
Standards, referred to as AS/NZS) when operating power tools.
[WARNING!] ALWAYS wear hearing protection. Hearing equipment should
comply with appropriate AS/NZS.
[WARNING!] ALWAYS wear a AS/NZS approved dust mask to prevent inhaling
dangerous dust or airborne particles.
ALWAYS keep the work area clean, well lit, and organized. DO NOT work in an
area that has slippery floor surfaces from debris, grease, and wax.
[CAUTION!] ALWAYS unplug the machine from the electrical receptacle when
making adjustments, changing parts or performing any maintenance.
AVOID ACCIDENTAL STARTING. Make sure that the power switch is in the
"OFF" position before plugging in the power cord to the electrical receptacle.
[WARNING!] AVOID a dangerous working environment. DO NOT use electrical
tools in a damp environment or expose them to rain or moisture.
[WARNING!] CHILDPROOF THE WORKSHOP AREA by removing switch keys,
unplugging tools from the electrical receptacles, and using padlocks to lock out
machinery, where applicable.
[CAUTION!] DO NOT use electrical tools in the presence of flammable liquids or
gasses.
DO NOT FORCE the machine to perform an operation for which it was not
designed. It will do a higher quality job, with less effort and safer, by only
performing operations for which the machine was intended.
[WARNING!] DO NOT stand on a machine. Serious injury could result if it tips
over or you accidentally contact any moving part.
DO NOT store anything above or near the machine.
Advertisement
Table of Contents
