Preparation For Recording; One Touch Recording; Cd Synchronised Start Recording - Philips MCM7/25 User Manual

IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.

Preparation for recording

1
Press TAPE.
2
Load a recordable tape into the tape deck.
3
í ë
Press or on the remote to select the
recording tape side.
➜
A appears on the display for the reverse
side.
➜
B appears on the display for the forward
side.
4
Press TAPE A/R on the remote repeatedly
to select a recording mode.
➜
å for recording on one side only.
➜
∂ for recording on both sides.
∂ ∂
∂ ∂
5
Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜
starts flashing.
REC
●
It is not possible to change tape side.
●
It is not possible to listen to another source.
●
It is not possible to activate the timer
function.
Tape Operations/ Recording

One touch recording

1
Press CD, TUNER or AUX to select the
recording source.
2
Start playback of the selected source.
3
Press and hold REC until
flashing on the display panel to start
recording.
To stop recording
●
Press Ç on the system.
Helpful Hint:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will appear.

CD Synchronised start recording

1
Press CD.
●
If you want to start recording from a desired
í
track, press
➜
You can programme the tracks in the order
you want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press and hold REC to start recording.
➜
The disc will start playback automatically.
To select another track during
recording
1
Press É Å to interrupt recording.
2
í or ë
Press
3
Press É Å to resume recording.
To stop recording
●
Press Ç.
➜
Recording and disc playback will stop
simultaneously.
icon starts
REC
ë
or .
to select the desired track.
21