Clock/Timer; Setting The Clock; Viewing The Clock; Setting The Timer - Philips MC138/25 User Manual

Setting the clock

1
Press and hold CLOCK button.
The clock digits for the hours flash.
Press VOLUME 3 / 4 (VOL 3 / 4 on the
2
remote control) to set the hours.
3
Press CLOCK again.
The clock digits for the minutes flash.
Press VOLUME 3 / 4 (VOL 3 / 4 on the
4
remote control) to set the minutes.
5
Press CLOCK to confirm the time.

Viewing the clock

To view the clock time in any source mode,
press CLOCK, the clock time will be displayed
for few seconds.
Note:
– If the clock has not been set, --:-- will be
displayed.

Setting the timer

The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In any mode, press TIMER for more than 2
seconds.
Press SOURCE (VOL 3 / 4 on the remote
2
control) to select sound source.
3
Press TIMER to confirm your desired source.
The selected source
shown. The clock digits for the hours flash.
Press VOLUME 3 / 4 (VOL 3 / 4 on the
4
remote control) to set the hours.
5
Press TIMER again.
The clock digits for the minutes flash.
Press VOLUME 3 / 4 (VOL 3 / 4 on the
6
remote control) to set the minutes.
7
Press TIMER to confirm the time.
The timer is now set and actiated.
Note:
- Timer will not start if recording is in progress
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER once.
Display shows
TIMER
disappears if deactivated.

Clock/Timer

or is
CD
if activated, and
17