What's In The Box; How To Connect Your System - Polk Mono LEGEND L800LC Owner's Manual

What's in the Box

Each box contains:
1. Loudspeaker
2. Owner's Manual
3. Registration Card
4. Magnetic grilles
5. 15' SDA Pro interconnect cable
6. Allen wrench
7. Dust cloth

How to Connect Your System

To get the best sound quality, it's important to wire your
speakers correctly.
SDA Pro Interconnect
Locate the interconnect cables packed with both the right and
left speaker. Each cable is 15' long, but they can be connected
together for a length of 30', if needed. Walk around to the
back of one speaker and locate the SDA Pro Interconnect
socket on the input plate. Align the plug properly with the
socket and push gently but firmly into place until it is fully
seated in the socket. To remove the plug, grasp it by the
molded body (not by the cable) and pull gently outward
(Figure 5). Walk across to other to the other speaker and
connect the other end of the interconnect cable in the
same manner.
Figure 5
1.
Amplifier/Receiver Connections
Locate the amplifier outputs, marked red and black. Red
corresponds to + (positive) and black corresponds to – (negative).
Using recommend speaker cable, connect the left channel
amplifier outputs to the left speaker, making certain to connect
the red or + output to the red terminal on the speaker. Connect
the black or – amplifier output to the black terminal on the same
speaker. Using recommended speaker cable, connect the right
channel amplifier outputs to the right speaker in the same way.
Right Channel
+ _
Inputs
Speaker Cables
RL
AVR
These recommendations are for all connections from the amplifier/
receiver to each speaker:
Runs
Lengths up to 25' (5 m)
Lengths greater than 25' (5 m)
but less than 50' (15 m)
Lengths greater than 50' (15 m)
but less than 75' (25 m)
Lengths greater than 75' (25 m)
OWNER S MANUAL
'
Left Channel
Interconnect Cable
+ _
Gauge
16 or better
14
12
10
5