Table of Contents
Advertisement
TM
2.10 CrossFireX
This motherboard supports CrossFireX
you to install up to three identical PCI Express x16 graphics cards. Currently
TM
CrossFireX
and 3-way CrossFireX
TM
*3-Way SLI
is only supported with CPU with 48 lanes or 44 lanes.
1. You should only use identical CrossFireX
certified.
2. Make sure that your graphics card driver supports AMD CrossFireX
Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum
power your system requires. It is recommended to use a AMD certified PSU. Please
refer to the AMD's website for details.
4. If you pair a 12-pipe CrossFireX
operate as 12-pipe cards while in CrossFireX
5. Different CrossFireX
TM
reX
. Please refer to AMD graphics card manuals for detailed installation guide.
2.10.1 Installing Two CrossFireX
CrossFire Bridge
and 3-Way CrossFireX
TM
and 3-way CrossFireX
TM
are supported with Windows® 10 64-bit OS.
TM
-ready graphics cards that are AMD
TM
Edition card with a 16-pipe card, both cards will
TM
cards may require different methods to enable CrossFi-
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
TM
Operation Guide
TM
that allows
TM
technology.
TM
mode.
X299 Creator
47
Hide quick links:
Advertisement
Table of Contents
