Other Functions
Setting the clock
1
In Standby mode, press and hold CLOCK/RDS
on the remote until the time flashes on the
display.
➜
"CLOCK" is displayed briefly. Then, the hour
digits flash on the display screen.
2
Press VOLUME +/ - (VOL+/- on the remote)
to set the hours and CLOCK/RDS to
confirm.
➜
The minute digits flash on the display screen.
3
Press VOLUME +/ - (VOL+/- on the remote)
to set the minutes and CLOCK/RDS to
confirm.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
Setting sleep/wake-up timer
Sleep timer setting
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1
In power-on mode, press SLEEP/TIMER on
the remote repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70
➜ 80 ➜ 90 ➜ 00
2
When you reach the desired length of time, stop
pressing SLEEP/TIMER.
➜
appears.
To deactivate the sleep timer
●
Press SLEEP/TIMER repeatedly until "00" is
displayed, or press ECO POWER/
STANDBY-ON B (B on the remote).
38
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1
Press and hold SLEEP/TIMER until the time
flashes on the display.
➜
"TIMER" scrolls. Then, the hour digits flash on
the display screen.
2
Press VOLUME +/ - (VOL+/- on the remote)
to set the hours and SLEEP/TIMER to
confirm.
➜
The minute digits flash on the display screen.
3
Press VOLUME +/ - (VOL+/- on the remote)
to set the minutes and SLEEP/TIMER to
confirm
➜
"OFF" flashes on the display screen.
6
Press VOLUME +/ - (VOL+/- on the remote)
to select "ON".
➜
icon appears on the display screen.
To deactivate the timer
●
Select "OFF" at Step 6.