Summit Shooter Xtrem Manual page 2

3
ASSEMBLY
1. Position the main leg assembly as shown in figure 1.
2. Remove one of the wire lock pins and fold the leg down. Reinsert
the wire lock pin in the rear hole as shown in figure 2. Repeat for all
legs.
3. Slide the seat adjustment ring onto the center post as shown in
figure 3.
4. Slide one large nylon bushing (shown in blue) onto the center post as shown in figure 4. Slide the seat arm (shown in green)
onto the center post and seat it on the nylon bushing.
1
3
5. Slide the remaining large nylon bushing onto the center post as shown in figure 5.
6. Slide the completed molded top with frame onto the nylon bushing as shown in figure 6.
5
PG 2
CAUTION
!
Keep fingers and hands away from pinch points when
folding legs
2
4
6
www.summitstands.com