Advertisement
Setup
Setup
Setting the clock
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON 2 on the set for 3 seconds or more to switch to normal
mode first before proceeding with the procedures below.
1
Press
on the remote control to view the time.
CLOCK
➜ The display shows the set time.
➜ 00:00 flashes by default if you have not set the clock.
2
Press
CLOCK
once again.
➜ The
hour digits start flashing.
3
Hold down or press
ALBUM/PRESET +/-
4
Press
to confirm.
CLOCK
➜ The
minute digits start flashing.
5
Hold down or press
ALBUM/PRESET +/-
6
Press
to confirm.
CLOCK
Enjoy
Playing discs
With this system, you can play all pre-recorded audio CDs (CDDA), all finalized audio CD-Rs
and CD-RWs, MP3/WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files)
1
Press
once or more to select CD (or
SOURCE
2
Press
OPEN/CLOSE
3
Insert a disc with the printed side facing up. Then close the CD door.
4
Press
to start playback.
OK/ÉÅ
5
To stop playback, press STOPÇ.
on the set repeatedly to set the hour.
on the set repeatedly to set the minute.
DISC
to open the CD compartment.
ç
on the remote control).
IMPORTANT!
– Remove the
protective plastic tab
before using the
remote control
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (CD or
TUNER, for example).
– Then select the desired function
( 2; for example).
Advertisement
