Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips MCM128B/05 User Manual

Philips micro hi-fi system mcm128b mp3/wma-cd playback usb direct
Hide thumbs Also See for MCM128B/05:
Table of Contents

Advertisement

M I C R O S Y S T E M
iR

Setting the clock

1
In Standby mode, press PROG/CLOCK
button.
The clock digits for the hours flash.
2
Press ¡1 / 2™ to set the hours.
3
Press PROG/CLOCK again.
The clock digits for the minutes flash.
4
Press ¡1 / 2™ to set the minutes.
5
Press PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set, -- --:-- -- will be
displayed.

Setting the timer

The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first
before the timer can be used.
If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1
In any mode, press TIMER on the remote
control for more than 2 seconds.
2
Press ¡1 / 2™ (or CD / TUNER on the
remote control) to select sound source.
3
Press TIMER to confirm your desired source.
The clock digits for the hours flash.
M C
M
1 2 8
USB DIRECT
4
Press ¡1 / 2™ to set the hours.
5
Press TIMER again.
The clock digits for the minutes flash.
6
Press ¡1 / 2™ to set the minutes.
7
Press TIMER to confirm the time.
The timer is now set and actiated.
Notes:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
- At the set time of wake up, the set will turn on at
volume level 12.
To activate and deactivate timer
In standby or during playback, press
TIMER once.
Display shows
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch
off by itself after a set period of time. The clock
time needs to be set first before the sleep timer
can be used.
Press SLEEP on the remote control repeatly
to select desired time before
system shuts off.
Display shows
SLEEP
series of time options for
selection:
,
,
To deactivate, press SLEEP on the remote
control once or more until "
press STANDBY ON on the system or
remote control.

Clock/Timer

if activated, and
SLEEP
TIMER
and
,
,
,
...
" is shown, or
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm128b

Table of Contents