Table of Contents
Advertisement
Basic Function/ Radio
Basic functions
Switching on/off the set
1 To switch on, press POWER.
➜ Display lights up.The system will switch to
the last selected source.
2 To switch off, press POWER again.
➜ Display lights off.
Adjusting volume and sound
Adjust the sound with the VOLUME and
DBB controls.
Digital tuner
Tuning to radio stations
1 Press repeatedly SOURCE (or TUNER on
the remote control) to select FM or AM.
➜ "TUNER" is displayed briefly, then the
radio station frequency, waveband and, if
programmed, a preset number are shown
(See 2).
2 Press and hold ∞ or § until the frequency in
the display starts running.
➜ The radio automatically tunes to a station
of sufficient reception. Display shows
" SEARCH" during automatic tuning.
3 Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press ∞ or §
•
briefly and repeatedly until you have found
optimal reception.
To improve radio reception:
•
For FM, extend, incline and turn the tele-
scopic aerial. Reduce its length if the signal is
too strong.
•
For AM, the set uses a built-in aerial. Direct
this aerial by turning the whole set.
Programming radio stations
You can store 15 FM and 10 AM radio
stations in the memory manually or
automatically (Auto store).
MP3-CD/ CD Player
Manual programming
1 Tune to your desired station (see Tuning to
radio stations).
2 Press PROG to activate programming.
➜ Display: PROG flashes.
3 Press ALBUM/PRESET +/-
(ALBUM/PRESET 3, 4 on the remote
control ) once or more to allocate a number
(from 1 to 25).
4 Press PROG to confirm.
5 Repeat steps 1-4 to store other stations.
Helpful hints:
–
You can erase a preset station by storing
another frequency in its place.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1 Press repeatedly SOURCE (or TUNER on
the remote control) to select FM or AM.
2 Press PROG until "AUTO" flashes.
➜ Available stations are programmed (AM
or FM). After all stations are stored, the
first autostore preset station will then
automatically play.
To listen to a preset or autostore
station
Press the ALBUM/PRESET +/-
(ALBUM/PRESET 3, 4 on the remote
control ) buttons once or more until the
desired preset station is displayed.
AVIS
Advertisement
Table of Contents
