Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips DC146/12 User Manual

STANDBY-ON
MIC RO S Y STE M DC14 6
iR
CD/CD - R/CD - RW COMPATIBLE
SOURC E
PRESE T
DOCK

Tuning to radio stations

1
Press SOURCE on the set repeatedly or press
TUN on the remote control repeatedly until
the desired waveband (FM or MW) is displayed.
2
Press down on TUNING 4 ¢ (4 / ¢
on the remote control) and release the button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SrcH.
3
Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING 4
¢ (4 / ¢ on the remote control) briefly
and repeatedly until you have found optimal
reception.

Programming radio stations

You can store up to a total of 20 radio stations
in the memory.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press PRESET + + /- + + +
number where programming should start.
VOL
TUNING DBB
REPEAT
VOL
- to select the preset - - -

Radio Reception

Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROG. for more than 2 seconds to
activate programming.
➜
"AUtO" is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.

Manual programming

1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROG to activate programming.
➜
flashes in the display.
PROG
3
Press PRESET + + + + /- +
from 1 to 20 to this station.
4
Press PROG again to confirm the setting.
➜
disappears, the preset number and the
PROG
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press PRESET + + + /- + +
station is displayed.
- to allocate a number - - -
- until the desired preset - - -
15