Burner Description; Burner Equipment - Riello BS1 Installation, Use And Maintenance Instructions

4.10

Burner description

12
11
10
1 Air pressure switch
2 6 pole socket for gas train
3 Control box with 7 pole socket incorporated
4 Reset button with lock-out signal
5 Flange with insulating gasket
6 Air damper adjustment assembly
7 Head assembly support
4.11

Burner equipment

Flange with insulating gasket . . . . . . . . . . . . . . . . . . . . . . No. 1
Screws and nuts for fixing the flange to the boiler . . . . . . . No. 4
Screw and nut for flange . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Remote reset connection . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
7-pin plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Spare parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Remote reset kit
The burner has a remote reset kit (RS) consisting of a con-
nection and a push-button operating at a distance of 20
metres max.
In order to install it, remove the safety lockout device installed
at the factory and insert the lockout supplied with the burner
(see electrical diagram).
Technical description of the burner
9
13
5
D7108
13
GB
4
3
2
8 Pressure test point
9 Combustion head
10 Motor
11 Capacitor
12 Head regulating rod
13 Gas diffuser
6
8
7
1
Fig. 6
20136130