Set The Sleep Timer; Adjust Display Brightness; Product Information; Specifi Cations - Philips DC350/79 User Manual

Set the sleep timer

This unit can switch to standby automatically after a set period of time.
1
When the unit is turned on, press SLEEP repeatedly to select a set period of time
(in minutes).
When the sleep timer is activated, the display shows
»
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off) is displayed.
When the sleep timer is deactivated,
»

Adjust display brightness

1
Press repeatedly BRIGHTNESS CONTROL on the main unit to select:
• Bright.
• Dim.
• Off.
9

Product information

Note
•
Product information is subject to change without prior notice.
Specifi cations
Amplifi er
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
Tuner
Tuning Range
Tuning grid
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
disappears on the display.
2X3W RMS
125Hz - 16kHz, ±3dB
>55dB
0.6 V RMS 10kohm
FM: 87.5 - 108MHz
50KHz
<22 dBf
<40 dBf
.
EN
23