Advertisement
INSTALLATION
1. Unscrew the drain flange(1) from drain.
2. Apply plumber's putty underside of flange as shown.
3. Insert the drain body (2) into the under side
of the lavatory.
4. Thread the drain flange onto the drain body.
5. Tighten the locknut(3) by hand from under-
side of the fixture. Remove any excess putty.
Notes: Do not reposition the drain after the locknut is
tighten, or you may leak the putty seal.
1
All Finishes: Clean the finish with a mild soap and warm water. wipe entire surface completely with a clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc., which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler drains and fittings.
1174812IN Rev-00
Apply plumber's putty
2
3
SERVICE PARTS
45432IN
GRID DRAIN WITH OVERFLOW
45433IN
GRID DRAIN WITHOUT OVERFLOW
2
1174812IN Rev-00
1032256
(TRIM RING-DRAIN)
1180876
TOP BODY
(WITH DRAIN HOLE)
1025650
(SEAL-DRAIN)
1025678
(WASHER-FRICTION)
1185437
(BASE-NUT)
1180877
TOP BODY
(WITHOUT DRAIN HOLE)
3
Advertisement
