Table of Contents
Advertisement
2.2 Rear Panel
No.
Name
Power
①
Indicator
Microphone
②
input port
③
Audio Inputs
④
ID Code
⑤
IR
⑥
Power Port
⑦
L+R RCA
Digital Audio
⑧
Input
⑨
RS232
⑩
Audio Output
40 Watt Power Amplifier
2
1
6
7
Function
Turns red when power on.
3-pole captive screw connector for microphone input, the dial
switch in right side is to select the micro input kind, including
48V (for condenser microphone), MIC (for dynamic
microphone) and LINE (for line audio).
3.5mm mini jack for stereo audio input, it can be connected
with audio source device such as DVD player.
16 codes range from 0 to F (hexadecimal), works together
with the PC control software.
To connect with the IR receiver, works together with the IR
remote.
To connect with the power adapter (DC24V).
Dual-mono audio input, which can be connected with audio
source device such as a PC.
Fiber connector for digital audio input (PCM format only), it
can be connected with a device with fiber port, such as
blue-ray player.
3-pole captive screw connector for serial control, it can be
connected with PC (Use a 3-pole captive to 9 pin female D
connector and serial control software) to control the amplifier.
To connect with audio output devices, such as speakers (To
select 70V or 100V depends on the input voltage of the
speakers). COM is for grounding (GND).
3
4
5
8
9
4
10
Advertisement
Table of Contents
