Operations Of Control Software; Connection With Computer; Rs232 Control Software - SE audio AMP100V User Manual

4.3 Operations of Control Software

4.3.1 Connection with Computer

When the amplifier connects to the COM1 or COM2 of the computer with control
software, users can control it by that computer.
To control the amplifier, users should use a 3-pole male captive screw to 9-pin HD
female connector and use the public COM software.

4.3.2 RS232 Control Software

Installation

 Connect the input source devices and the output device according to the system
diagram.
 Copy the RS232 control software to one computer, and then connect the RS232 port
of this computer and the amplifier.
 Double-click the EXE program to execute the software.
Here we take the software CommWatch.exe as example. The icon is showed as below:
Uninstallation Delete all the control software files in corresponding file path.

40 Watt Power Amplifier
Figure 10 Connection of RS232 Port
Figure 11 Control Software
10
PC