Operations Of Ir Remote - SE audio AMP100V User Manual

4.2 Operations of IR Remote

The amplifier provides with an IR eye, with the IR Receiver and the IR remote, user can
control the amplifier remotely.
Notice: The IR Receiver and the IR remote are all offered for charge.
Audio Source Selection:
1: 2 RCA dual-mono audio
input
2: 1 3.5mm jack
3: 1 Digital fiber audio input
Audio Controlling Modes
MIC: turn up/down the
microphone volume.
LINE: turn up/down the line
volume.
BASS: bass tuning
TREBLE: treble of line
volume.
IR receiver, works together
with the IR remote. Please
point the IR remote at the IR
receiver when use, to avoid
getting out of control as there
is no signal detected.
40 Watt Power Amplifier
Figure 8 IR Remote
Figure 9 IR Receiver
9
Use to transmit the
infrared signal send by
the remote controller.
Mute Mode:
MIC: Mute the
microphone volume.
LINE: Mute the line
volume.
SPEAKER: Unmute
3.5mm jack
Insert it into the
specialized PA3
socket (3.5mm), to
connect the IR
receiver with PA3.