Audio Inputs - SE audio AMP100V User Manual

way (Total power mustn't be more than 40Watt).
The following figure shows us how to connect with the speakers. Here we take the
100V/10W speakers for each as example.
Speaker
(100V/10W)
Note: Speakers to be connected should be with constant pressure.

3.3.2 Audio Inputs

The amplifier provides with 2 stereo audio inputs, one microphone input and one digital
fiber audio input. The following figure shows the audio input ports.
 48V phantom power input
When the switch turns to "48V" (It has a good frequency characteristic, high input
impedance and high sensitivity in this mode), the MIC input will provide a 48V phantom
power. This is usually used for power supply for condenser microphone, Connection is:
"+" connects to positive, "-" connects to negative and "
Note: In this mode, only condenser microphone can be connected with.
40 Watt Power Amplifier
COM 70V 100V
Speaker
(100V/10W)
Figure 4 Audio Output Connection
Dial Switch, to select the MIC input mode,
includes MIC (dynamic microphone), 48V
(condenser microphone) and LINE (normal
audio or wireless microphone).
Figure 5 Audio Input Ports
6
Speaker Speaker
(100V/10W) (100V/10W)
" to ground.