Joni MaxiMix QuickChill Operating Manual page 17

NOTICE!
The heating power function is used to determine the temperature of the steam jacket based on
the food temperature, and therefore how powerful the heating should be.
As the food is heated, the temperature of the jacket will automatically increase.
Lower power gives gentler heating but a longer heating time.
Higher power gives less gentle heating but a shorter heating time.
When power step 9 is selected, the temperature of the jacket will be set to maximum and the heat-
ing time will be the shortest possible.
General
The heating power supply is switched on/off by pressing . The LED will illuminate when the heating
is switched on.
To ensure that the food is heated uniformly and quickly, it should be stirred whenever possible. This also
gives an even distribution of heat, and therefore better temperature measurement to control the heating
process.
The kettle must be in the vertical position in order to heat its contents. If this is not the case, error code
U10 will be shown and the LED will flash until the kettle has returned to the vertical position or the heating
has been switched off. If the kettle is vertical again within two minutes, the heating will be switched on
automatically. If it takes longer than this, the heating must be switched on manually.
16/69
we know what's cooking